Fix faults without calling a repairman
Do you want to fix your home faults yourself and save good money at the end of the month? There is nothing simpler. But be careful Do not engage in risky activities You cannot control well -electricity, gas and the like-, because in this case disaster is guaranteed and can also be dangerous.
The most common household malfunctions are easy to fix
Are you losing hope with that persistent dripping water from your tap? Or with a cabinet door that doesn't slide comfortably and that you have to push with both hands? Do you want to fix the malfunctions without waiting for the technician? We give you some tips to solve it most common home DIY jobs.
Fix leaky faucet
This is probably due to the seals being too old and worn. Before rectifying the fault, turn off the water to avoid the risk of overflow and then remove the tap. Cold and hot in two touches replace worn gasketbut if it's a blender, like the one in the Pixabay photo, you'll have no choice but to replace the entire cartridge.
When water comes out with high or low pressure, It is easy to fix the error without resorting to a professional. In the first case, perhaps the aerator (tap) is clogged. You need to unscrew it and clean it thoroughly, for example, with an unused toothbrush. If the water comes out with great force, it is recommended to install a water tap. Pressure reducer diameter suitable for your tap. It is a part that is easily placed on the tap and also saves a lot of water.
Cabinet slide is stuck
Check if it has come off the hook or if the bearings are damaged. Cabinet doors tend to fall with weight and use. In this case, you will need to set them (sometimes they have a screw that holds the mechanism) and reposition them in the guides. The bearings may also be damaged and no longer “turn well”. If so, replace them with similar ones. Take the old ones to the shop because new bearings must be adapted to existing guides. If you finally decide to modernize your doors, don't stop reading this article.
The oven does not heat well
How old are you? Same now replace rubber seal it seals the door hermetically, so the interior does not lose heat. The seal attachment system is not the same for all models, but for many well-known brands it is usually attached with hooks to the corners of the rectangle of the door closing hole. To remove the old rubber, simply turn it and do the reverse movement to insert it. To make the rubber the same, take it to the store or buy it from the brand's distributor.
Is the tile on the floor broken?
It’s a chore to have such a beautiful piece of flooring broken by a metal object, but you can hide the damage. You can easily fix mistakes that occur on ceramic floors too. Follow these steps: apply a clear resin for tiles, you can find it in bars. Let it harden and pass after a spatula to finally apply the enamel that most closely resembles the color of the coating. Clever!
The entrance door is placed on the parquet floor
This is one of the most common problems: over time, the door falls down and scratches the floor. There are two possible solutions, although the first is the most recommended: Install new washers on the hinges. The function of this part is to minimize friction and use sometimes results in it being crushed or even broken. Replacing it with a new one is the simplest way to fix the fault without calling a repairman.
Second option scrub the door slightly from underneath. If it is not rubbing too much, it will be enough to pass a coarse sandpaper between 40 and 80. Secure it to the floor with adhesive tape with the sandpaper side up and open and close the door repeatedly so that the wood is “lowered” onto the paper as it passes.
The radiators are cold
Despite the fact that the heating is at full power, the radiators do not overheat? The fault is very easy to fix in conventional models, as in the photo from Pixabay. It is probably accumulated air. There is nothing easier than to make them come out: insert an edge coin or, better yet, a flat screwdriver into the groove of the bleeder key, which is always located on the right side.
To collect water in the circuit, place a container under it in advance and when unscrewing the drain it can come out (it is not necessary to completely unscrew it). When the water starts to come out, you will notice the hiss of air, press the aerator again.
How to do it: As you can see, fixing the faults in your home is easier than it seems, and if you dare to get down to business, you will see how your household budget will notice.
The topic Fix faults without calling a repairman appeared first on mobeltrend.com.
