How to repair wood floors and make them look new

Typically, wood floors will last for several years after installation. However, at some point, you will need to maintain them to restore your appearance as it wears down from overuse and time.

Step by step to save your wooden floor

Required tools:

You only need three items to save your wood floor: an orbital or broken orbital sander, varnish, and sandpaper in different weights.

Step 1) Sanding

It removes the existing varnish layer with a sanding machine and 36 grit sandpaper. It ensures that the surface does not fluctuate due to excessive sanding by sanding in different directions.

Once you have removed all the varnish, you will replace the coarse sandpaper with a medium grit sandpaper to remove the scratches caused by the coarse sandpaper. This will give the wood a smoother finish.

Step 2) Cleaning

After completing the lynching of the floor, you should clean it thoroughly using a vacuum cleaner to remove the particles left from the lynching. Cleaning is very important and you should not forget any corner or wall corner.

Step 3) Varnish

Once the surface is completely clean, you can begin polishing the floor.

You can choose different types of varnish to finish your flooring, some can even change the color of the wood after application.

The application of varnish can be done by brush or roller. Apply two to three coats of varnish to achieve shine and create a good protective film.

Drying time

Varnish with a formaldehyde base takes about a month to dry completely, but you can already walk on it three days after its application. Take great care in the placement of furniture to avoid scratches.

Conclusion

This procedure is not that complicated and can be done by anyone willing. However, since wood is a delicate material and can be damaged by the lynching process, in some cases it is recommended that a professional perform this rescue.

How to repair wooden floors and make them look new appeared first on mobeltrend.com.